MrBesen
/
ffmpeg
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ffmpeg/libavutil/tx.c

940 lines
29 KiB
C
Raw Permalink Normal View History

libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
/*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
avutil/mem_internal: Fix headers Including avassert.h is unnecessary since commit 786be70e28fe739b8e49893fa13ae4652a68d1ea. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
2022-08-22 16:41:09 +02:00
#include "avassert.h"
lavu/tx: add length decomposition function Rather than using a list of lengths supported, this goes a step beyond and uses all registered codelets to come up with a good decomposition.
2022-11-19 00:58:13 +01:00
#include "intmath.h"
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
#include "cpu.h"
avutil/common: Don't auto-include mem.h There are lots of files that don't need it: The number of object files that actually need it went down from 2011 to 884 here. Keep it for external users in order to not cause breakages. Also improve the other headers a bit while just at it. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
2024-03-25 01:30:37 +01:00
#include "mem.h"
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
#include "qsort.h"
#include "bprint.h"
lavu/tx: add support for double precision FFT and MDCT Simply moves and templates the actual transforms to support an additional data type. Unlike the float version, which is equal or better than libfftw3f, double precision output is bit identical with libfftw3.
2019-07-27 19:54:20 +02:00
#include "tx_priv.h"
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
#define TYPE_IS(type, x) \
(((x) == AV_TX_FLOAT_ ## type) || \
((x) == AV_TX_DOUBLE_ ## type) || \
((x) == AV_TX_INT32_ ## type))
lavu/tx: implement 32 bit fixed point FFT and MDCT Required minimal changes to the code so made sense to implement. FFT and MDCT tested, the output of both was properly rounded. Fun fact: the non-power-of-two fixed-point FFT and MDCT are the fastest ever non-power-of-two fixed-point FFT and MDCT written. This can replace the power of two integer MDCTs in aac and ac3 if the MIPS optimizations are ported across. Unfortunately the ac3 encoder uses a 16-bit fixed point forward transform, unlike the encoder which uses a 32bit inverse transform, so some modifications might be required there. The 3-point FFT is somewhat less accurate than it otherwise could be, having minor rounding errors with bigger transforms. However, this could be improved later, and the way its currently written is the way one would write assembly for it. Similar rounding errors can also be found throughout the power of two FFTs as well, though those are more difficult to correct. Despite this, the integer transforms are more than accurate enough.
2020-02-09 00:13:28 +01:00
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
/* Calculates the modular multiplicative inverse */
lavu/tx: add support for double precision FFT and MDCT Simply moves and templates the actual transforms to support an additional data type. Unlike the float version, which is equal or better than libfftw3f, double precision output is bit identical with libfftw3.
2019-07-27 19:54:20 +02:00
static av_always_inline int mulinv(int n, int m)
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
{
n = n % m;
for (int x = 1; x < m; x++)
if (((n * x) % m) == 1)
return x;
av_assert0(0); /* Never reached */
avutil/tx: add a return at the end of non-void functions Fixes compilation with GCC 11 when configured with --disable-optimizations Signed-off-by: James Almer <jamrial@gmail.com>
2021-08-06 15:29:46 +02:00
return 0;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
}
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
int ff_tx_gen_pfa_input_map(AVTXContext *s, FFTXCodeletOptions *opts,
int d1, int d2)
{
const int sl = d1*d2;
s->map = av_malloc(s->len*sizeof(*s->map));
if (!s->map)
return AVERROR(ENOMEM);
for (int k = 0; k < s->len; k += sl) {
if (s->inv || (opts && opts->map_dir == FF_TX_MAP_SCATTER)) {
for (int m = 0; m < d2; m++)
for (int n = 0; n < d1; n++)
s->map[k + ((m*d1 + n*d2) % (sl))] = m*d1 + n;
} else {
for (int m = 0; m < d2; m++)
for (int n = 0; n < d1; n++)
s->map[k + m*d1 + n] = (m*d1 + n*d2) % (sl);
}
if (s->inv)
for (int w = 1; w <= ((sl) >> 1); w++)
FFSWAP(int, s->map[k + w], s->map[k + sl - w]);
}
s->map_dir = opts ? opts->map_dir : FF_TX_MAP_GATHER;
return 0;
}
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
/* Guaranteed to work for any n, m where gcd(n, m) == 1 */
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
int ff_tx_gen_compound_mapping(AVTXContext *s, FFTXCodeletOptions *opts,
int inv, int n, int m)
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
{
int *in_map, *out_map;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
const int len = n*m; /* Will not be equal to s->len for MDCTs */
int m_inv, n_inv;
/* Make sure the numbers are coprime */
if (av_gcd(n, m) != 1)
return AVERROR(EINVAL);
m_inv = mulinv(m, n);
n_inv = mulinv(n, m);
if (!(s->map = av_malloc(2*len*sizeof(*s->map))))
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
return AVERROR(ENOMEM);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
in_map = s->map;
out_map = s->map + len;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
/* Ruritanian map for input, CRT map for output, can be swapped */
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
if (opts && opts->map_dir == FF_TX_MAP_SCATTER) {
for (int j = 0; j < m; j++) {
for (int i = 0; i < n; i++) {
in_map[(i*m + j*n) % len] = j*n + i;
out_map[(i*m*m_inv + j*n*n_inv) % len] = i*m + j;
}
}
} else {
for (int j = 0; j < m; j++) {
for (int i = 0; i < n; i++) {
in_map[j*n + i] = (i*m + j*n) % len;
out_map[(i*m*m_inv + j*n*n_inv) % len] = i*m + j;
}
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
}
}
if (inv) {
for (int i = 0; i < m; i++) {
int *in = &in_map[i*n + 1]; /* Skip the DC */
for (int j = 0; j < ((n - 1) >> 1); j++)
FFSWAP(int, in[j], in[n - j - 2]);
}
}
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
s->map_dir = opts ? opts->map_dir : FF_TX_MAP_GATHER;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
return 0;
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
static inline int split_radix_permutation(int i, int len, int inv)
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
{
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
len >>= 1;
if (len <= 1)
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
return i & 1;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (!(i & len))
return split_radix_permutation(i, len, inv) * 2;
len >>= 1;
return split_radix_permutation(i, len, inv) * 4 + 1 - 2*(!(i & len) ^ inv);
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
}
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
int ff_tx_gen_ptwo_revtab(AVTXContext *s, FFTXCodeletOptions *opts)
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
{
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int len = s->len;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (!(s->map = av_malloc(len*sizeof(*s->map))))
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
return AVERROR(ENOMEM);
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
if (opts && opts->map_dir == FF_TX_MAP_SCATTER) {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
for (int i = 0; i < s->len; i++)
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
s->map[-split_radix_permutation(i, len, s->inv) & (len - 1)] = i;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
} else {
for (int i = 0; i < s->len; i++)
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
s->map[i] = -split_radix_permutation(i, len, s->inv) & (len - 1);
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
}
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
s->map_dir = opts ? opts->map_dir : FF_TX_MAP_GATHER;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
return 0;
}
lavu/tx: generalize single-factor transforms Not that useful, but it gives us fast small odd-length transforms.
2022-09-24 06:49:16 +02:00
int ff_tx_gen_inplace_map(AVTXContext *s, int len)
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
{
lavu/tx: generalize single-factor transforms Not that useful, but it gives us fast small odd-length transforms.
2022-09-24 06:49:16 +02:00
int *src_map, out_map_idx = 0;
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (!s->sub || !s->sub->map)
return AVERROR(EINVAL);
if (!(s->map = av_mallocz(len*sizeof(*s->map))))
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
return AVERROR(ENOMEM);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
src_map = s->sub->map;
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
/* The first coefficient is always already in-place */
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
for (int src = 1; src < s->len; src++) {
int dst = src_map[src];
avutil/tx: Fix declaration after statement Reviewed-by: Paul B Mahol <onemda@gmail.com> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2021-02-22 05:57:14 +01:00
int found = 0;
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
if (dst <= src)
continue;
lavu/tx: minor code style improvements and additional comments
2021-04-10 03:45:03 +02:00
/* This just checks if a closed loop has been encountered before,
* and if so, skips it, since to fully permute a loop we must only
* enter it once. */
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
do {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
for (int j = 0; j < out_map_idx; j++) {
if (dst == s->map[j]) {
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
found = 1;
break;
}
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
dst = src_map[dst];
lavu/tx: simplify in-place permute search function
2021-02-27 04:19:55 +01:00
} while (dst != src && !found);
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
if (!found)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
s->map[out_map_idx++] = src;
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
s->map[out_map_idx++] = 0;
lavu/tx: support in-place FFT transforms This commit adds support for in-place FFT transforms. Since our internal transforms were all in-place anyway, this only changes the permutation on the input. Unfortunately, research papers were of no help here. All focused on dry hardware implementations, where permutes are free, or on software implementations where binary bloat is of no concern so storing dozen times the transforms for each permutation and version is not considered bad practice. Still, for a pure C implementation, it's only around 28% slower than the multi-megabyte FFTW3 in unaligned mode. Unlike a closed permutation like with PFA, split-radix FFT bit-reversals contain multiple NOPs, multiple simple swaps, and a few chained swaps, so regular single-loop single-state permute loops were not possible. Instead, we filter out parts of the input indices which are redundant. This allows for a single branch, and with some clever AVX512 asm, could possibly be SIMD'd without refactoring. The inplace_idx array is guaranteed to never be larger than the revtab array, and in practice only requires around log2(len) entries. The power-of-two MDCTs can be done in-place as well. And it's possible to eliminate a copy in the compound MDCTs too, however it'll be slower than doing them out of place, and we'd need to dirty the input array.
2021-02-10 17:58:22 +01:00
return 0;
}
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
static void parity_revtab_generator(int *revtab, int n, int inv, int offset,
int is_dual, int dual_high, int len,
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int basis, int dual_stride, int inv_lookup)
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
{
len >>= 1;
if (len <= basis) {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int k1, k2, stride, even_idx, odd_idx;
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
is_dual = is_dual && dual_stride;
dual_high = is_dual & dual_high;
stride = is_dual ? FFMIN(dual_stride, len) : 0;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
even_idx = offset + dual_high*(stride - 2*len);
odd_idx = even_idx + len + (is_dual && !dual_high)*len + dual_high*len;
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
for (int i = 0; i < len; i++) {
k1 = -split_radix_permutation(offset + i*2 + 0, n, inv) & (n - 1);
k2 = -split_radix_permutation(offset + i*2 + 1, n, inv) & (n - 1);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (inv_lookup) {
revtab[even_idx++] = k1;
revtab[odd_idx++] = k2;
} else {
revtab[k1] = even_idx++;
revtab[k2] = odd_idx++;
}
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
if (stride && !((i + 1) % stride)) {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
even_idx += stride;
odd_idx += stride;
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
}
}
return;
}
parity_revtab_generator(revtab, n, inv, offset,
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
0, 0, len >> 0, basis, dual_stride, inv_lookup);
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
parity_revtab_generator(revtab, n, inv, offset + (len >> 0),
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
1, 0, len >> 1, basis, dual_stride, inv_lookup);
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
parity_revtab_generator(revtab, n, inv, offset + (len >> 0) + (len >> 1),
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
1, 1, len >> 1, basis, dual_stride, inv_lookup);
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
}
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
int ff_tx_gen_split_radix_parity_revtab(AVTXContext *s, int len, int inv,
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
FFTXCodeletOptions *opts,
int basis, int dual_stride)
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
{
basis >>= 1;
if (len < basis)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
return AVERROR(EINVAL);
lavu/tx: remove special -1 inverted lookup mode It was somewhat hacky and unnecessary.
2022-09-23 10:32:39 +02:00
if (!(s->map = av_mallocz(len*sizeof(*s->map))))
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
return AVERROR(ENOMEM);
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
av_assert0(!dual_stride || !(dual_stride & (dual_stride - 1)));
av_assert0(dual_stride <= basis);
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
parity_revtab_generator(s->map, len, inv, 0, 0, 0, len,
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
basis, dual_stride,
opts ? opts->map_dir == FF_TX_MAP_GATHER : FF_TX_MAP_GATHER);
s->map_dir = opts ? opts->map_dir : FF_TX_MAP_GATHER;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
return 0;
}
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
static void reset_ctx(AVTXContext *s, int free_sub)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
{
if (!s)
return;
if (s->sub)
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
for (int i = 0; i < TX_MAX_SUB; i++)
reset_ctx(&s->sub[i], free_sub + 1);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
if (s->cd_self && s->cd_self->uninit)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
s->cd_self->uninit(s);
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
if (free_sub)
av_freep(&s->sub);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
av_freep(&s->map);
av_freep(&s->exp);
av_freep(&s->tmp);
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
/* Nothing else needs to be reset, it gets overwritten if another
* ff_tx_init_subtx() call is made. */
s->nb_sub = 0;
s->opaque = NULL;
memset(s->fn, 0, sizeof(*s->fn));
}
void ff_tx_clear_ctx(AVTXContext *s)
{
reset_ctx(s, 0);
lavu/tx: add parity revtab generator version This will be used for SIMD support.
2021-04-10 03:52:31 +02:00
}
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
av_cold void av_tx_uninit(AVTXContext **ctx)
{
avutil/tx: should check against (*ctx) ctx is a pointer to pointer here. Signed-off-by: Ruiling Song <ruiling.song@intel.com>
2019-05-16 06:47:36 +02:00
if (!(*ctx))
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
return;
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
reset_ctx(*ctx, 1);
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
av_freep(ctx);
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
static av_cold int ff_tx_null_init(AVTXContext *s, const FFTXCodelet *cd,
uint64_t flags, FFTXCodeletOptions *opts,
int len, int inv, const void *scale)
{
/* Can only handle one sample+type to one sample+type transforms */
lavu/tx: add an RDFT implementation RDFTs are full of conventions that vary between implementations. What I've gone for here is what's most common between both fftw, avcodec's rdft and what we use, the equivalent of which is DFT_R2C for forward and IDFT_C2R for inverse. The other 2 conventions (IDFT_R2C and DFT_C2R) were not used at all in our code, and their names are also not appropriate. If there's a use for either, we can easily add a flag which would just flip the sign on one exptab. For some unknown reason, possibly to allow reusing FFT's exp tables, av_rdft's C2R output is 0.5x lower than what it should be to ensure a proper back-and-forth conversion. This code outputs its real samples at the correct level, which matches FFTW's level, and allows the user to change the level and insert arbitrary multiplies for free by setting the scale option.
2022-01-21 07:50:53 +01:00
if (TYPE_IS(MDCT, s->type) || TYPE_IS(RDFT, s->type))
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
return AVERROR(EINVAL);
return 0;
}
/* Null transform when the length is 1 */
static void ff_tx_null(AVTXContext *s, void *_out, void *_in, ptrdiff_t stride)
{
memcpy(_out, _in, stride);
}
static const FFTXCodelet ff_tx_null_def = {
lavu/tx: wrap missed string in NULL_IF_CONFIG_SMALL It's the only one that isn't defined through the macros used elsewhere.
2022-02-07 04:22:19 +01:00
.name = NULL_IF_CONFIG_SMALL("null"),
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
.function = ff_tx_null,
.type = TX_TYPE_ANY,
.flags = AV_TX_UNALIGNED | FF_TX_ALIGNED |
FF_TX_OUT_OF_PLACE | AV_TX_INPLACE,
.factors[0] = TX_FACTOR_ANY,
.min_len = 1,
.max_len = 1,
.init = ff_tx_null_init,
.cpu_flags = FF_TX_CPU_FLAGS_ALL,
.prio = FF_TX_PRIO_MAX,
};
static const FFTXCodelet * const ff_tx_null_list[] = {
&ff_tx_null_def,
NULL,
};
lavu/tx: refactor and separate codelet list and prio code
2022-11-17 22:14:53 +01:00
/* Array of all compiled codelet lists. Order is irrelevant. */
static const FFTXCodelet * const * const codelet_list[] = {
ff_tx_codelet_list_float_c,
ff_tx_codelet_list_double_c,
ff_tx_codelet_list_int32_c,
ff_tx_null_list,
#if HAVE_X86ASM
ff_tx_codelet_list_float_x86,
#endif
#if ARCH_AARCH64
ff_tx_codelet_list_float_aarch64,
#endif
};
static const int codelet_list_num = FF_ARRAY_ELEMS(codelet_list);
static const int cpu_slow_mask = AV_CPU_FLAG_SSE2SLOW | AV_CPU_FLAG_SSE3SLOW |
AV_CPU_FLAG_ATOM | AV_CPU_FLAG_SSSE3SLOW |
AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER;
static const int cpu_slow_penalties[][2] = {
{ AV_CPU_FLAG_SSE2SLOW, 1 + 64 },
{ AV_CPU_FLAG_SSE3SLOW, 1 + 64 },
{ AV_CPU_FLAG_SSSE3SLOW, 1 + 64 },
{ AV_CPU_FLAG_ATOM, 1 + 128 },
{ AV_CPU_FLAG_AVXSLOW, 1 + 128 },
{ AV_CPU_FLAG_SLOW_GATHER, 1 + 32 },
};
static int get_codelet_prio(const FFTXCodelet *cd, int cpu_flags, int len)
{
int prio = cd->prio;
int max_factor = 0;
/* If the CPU has a SLOW flag, and the instruction is also flagged
* as being slow for such, reduce its priority */
for (int i = 0; i < FF_ARRAY_ELEMS(cpu_slow_penalties); i++) {
if ((cpu_flags & cd->cpu_flags) & cpu_slow_penalties[i][0])
prio -= cpu_slow_penalties[i][1];
}
/* Prioritize aligned-only codelets */
if ((cd->flags & FF_TX_ALIGNED) && !(cd->flags & AV_TX_UNALIGNED))
prio += 64;
/* Codelets for specific lengths are generally faster */
if ((len == cd->min_len) && (len == cd->max_len))
prio += 64;
/* Forward-only or inverse-only transforms are generally better */
if ((cd->flags & (FF_TX_FORWARD_ONLY | FF_TX_INVERSE_ONLY)))
prio += 64;
/* Larger factors are generally better */
for (int i = 0; i < TX_MAX_SUB; i++)
max_factor = FFMAX(cd->factors[i], max_factor);
if (max_factor)
prio += 16*max_factor;
return prio;
}
lavu/tx: add length decomposition function Rather than using a list of lengths supported, this goes a step beyond and uses all registered codelets to come up with a good decomposition.
2022-11-19 00:58:13 +01:00
typedef struct FFTXLenDecomp {
int len;
int len2;
int prio;
const FFTXCodelet *cd;
} FFTXLenDecomp;
static int cmp_decomp(FFTXLenDecomp *a, FFTXLenDecomp *b)
{
return FFDIFFSIGN(b->prio, a->prio);
}
int ff_tx_decompose_length(int dst[TX_MAX_DECOMPOSITIONS], enum AVTXType type,
int len, int inv)
{
int nb_decomp = 0;
FFTXLenDecomp ld[TX_MAX_DECOMPOSITIONS];
int codelet_list_idx = codelet_list_num;
const int cpu_flags = av_get_cpu_flags();
/* Loop through all codelets in all codelet lists to find matches
* to the requirements */
while (codelet_list_idx--) {
const FFTXCodelet * const * list = codelet_list[codelet_list_idx];
const FFTXCodelet *cd = NULL;
while ((cd = *list++)) {
int fl = len;
int skip = 0, prio;
int factors_product = 1, factors_mod = 0;
if (nb_decomp >= TX_MAX_DECOMPOSITIONS)
goto sort;
/* Check if the type matches */
if (cd->type != TX_TYPE_ANY && type != cd->type)
continue;
/* Check direction for non-orthogonal codelets */
if (((cd->flags & FF_TX_FORWARD_ONLY) && inv) ||
lavu/tx: add real to real and real to imaginary RDFT transforms These are in-place transforms, required for DCT-I and DST-I. Templated as the mod2 variant requires minor modifications, and is required specifically for DCT-I/DST-I.
2023-08-03 18:21:23 +02:00
((cd->flags & (FF_TX_INVERSE_ONLY | AV_TX_FULL_IMDCT)) && !inv) ||
((cd->flags & (FF_TX_FORWARD_ONLY | AV_TX_REAL_TO_REAL)) && inv) ||
((cd->flags & (FF_TX_FORWARD_ONLY | AV_TX_REAL_TO_IMAGINARY)) && inv))
lavu/tx: add length decomposition function Rather than using a list of lengths supported, this goes a step beyond and uses all registered codelets to come up with a good decomposition.
2022-11-19 00:58:13 +01:00
continue;
/* Check if the CPU supports the required ISA */
if (cd->cpu_flags != FF_TX_CPU_FLAGS_ALL &&
!(cpu_flags & (cd->cpu_flags & ~cpu_slow_mask)))
continue;
for (int i = 0; i < TX_MAX_FACTORS; i++) {
if (!cd->factors[i] || (fl == 1))
break;
if (cd->factors[i] == TX_FACTOR_ANY) {
factors_mod++;
factors_product *= fl;
} else if (!(fl % cd->factors[i])) {
factors_mod++;
if (cd->factors[i] == 2) {
int b = ff_ctz(fl);
fl >>= b;
factors_product <<= b;
} else {
do {
fl /= cd->factors[i];
factors_product *= cd->factors[i];
} while (!(fl % cd->factors[i]));
}
}
}
/* Disqualify if factor requirements are not satisfied or if trivial */
if ((factors_mod < cd->nb_factors) || (len == factors_product))
continue;
if (av_gcd(factors_product, fl) != 1)
continue;
/* Check if length is supported and factorization was successful */
if ((factors_product < cd->min_len) ||
(cd->max_len != TX_LEN_UNLIMITED && (factors_product > cd->max_len)))
continue;
prio = get_codelet_prio(cd, cpu_flags, factors_product) * factors_product;
/* Check for duplicates */
for (int i = 0; i < nb_decomp; i++) {
if (factors_product == ld[i].len) {
/* Update priority if new one is higher */
if (prio > ld[i].prio)
ld[i].prio = prio;
skip = 1;
break;
}
}
/* Add decomposition if unique */
if (!skip) {
ld[nb_decomp].cd = cd;
ld[nb_decomp].len = factors_product;
ld[nb_decomp].len2 = fl;
ld[nb_decomp].prio = prio;
nb_decomp++;
}
}
}
if (!nb_decomp)
return AVERROR(EINVAL);
sort:
AV_QSORT(ld, nb_decomp, FFTXLenDecomp, cmp_decomp);
for (int i = 0; i < nb_decomp; i++) {
if (ld[i].cd->nb_factors > 1)
dst[i] = ld[i].len2;
else
dst[i] = ld[i].len;
}
return nb_decomp;
}
int ff_tx_gen_default_map(AVTXContext *s, FFTXCodeletOptions *opts)
{
s->map = av_malloc(s->len*sizeof(*s->map));
if (!s->map)
return AVERROR(ENOMEM);
s->map[0] = 0; /* DC is always at the start */
if (s->inv) /* Reversing the ACs flips the transform direction */
for (int i = 1; i < s->len; i++)
s->map[i] = s->len - i;
else
for (int i = 1; i < s->len; i++)
s->map[i] = i;
s->map_dir = FF_TX_MAP_GATHER;
return 0;
}
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#if !CONFIG_SMALL
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
static void print_flags(AVBPrint *bp, uint64_t f)
{
int prev = 0;
const char *sep = ", ";
av_bprintf(bp, "flags: [");
if ((f & FF_TX_ALIGNED) && ++prev)
av_bprintf(bp, "aligned");
if ((f & AV_TX_UNALIGNED) && ++prev)
av_bprintf(bp, "%sunaligned", prev > 1 ? sep : "");
if ((f & AV_TX_INPLACE) && ++prev)
av_bprintf(bp, "%sinplace", prev > 1 ? sep : "");
if ((f & FF_TX_OUT_OF_PLACE) && ++prev)
av_bprintf(bp, "%sout_of_place", prev > 1 ? sep : "");
if ((f & FF_TX_FORWARD_ONLY) && ++prev)
av_bprintf(bp, "%sfwd_only", prev > 1 ? sep : "");
if ((f & FF_TX_INVERSE_ONLY) && ++prev)
av_bprintf(bp, "%sinv_only", prev > 1 ? sep : "");
if ((f & FF_TX_PRESHUFFLE) && ++prev)
av_bprintf(bp, "%spreshuf", prev > 1 ? sep : "");
if ((f & AV_TX_FULL_IMDCT) && ++prev)
av_bprintf(bp, "%simdct_full", prev > 1 ? sep : "");
lavu/tx: add real to real and real to imaginary RDFT transforms These are in-place transforms, required for DCT-I and DST-I. Templated as the mod2 variant requires minor modifications, and is required specifically for DCT-I/DST-I.
2023-08-03 18:21:23 +02:00
if ((f & AV_TX_REAL_TO_REAL) && ++prev)
av_bprintf(bp, "%sreal_to_real", prev > 1 ? sep : "");
if ((f & AV_TX_REAL_TO_IMAGINARY) && ++prev)
av_bprintf(bp, "%sreal_to_imaginary", prev > 1 ? sep : "");
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
if ((f & FF_TX_ASM_CALL) && ++prev)
av_bprintf(bp, "%sasm_call", prev > 1 ? sep : "");
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
av_bprintf(bp, "]");
}
static void print_type(AVBPrint *bp, enum AVTXType type)
{
av_bprintf(bp, "%s",
type == TX_TYPE_ANY ? "any" :
type == AV_TX_FLOAT_FFT ? "fft_float" :
type == AV_TX_FLOAT_MDCT ? "mdct_float" :
lavu/tx: add an RDFT implementation RDFTs are full of conventions that vary between implementations. What I've gone for here is what's most common between both fftw, avcodec's rdft and what we use, the equivalent of which is DFT_R2C for forward and IDFT_C2R for inverse. The other 2 conventions (IDFT_R2C and DFT_C2R) were not used at all in our code, and their names are also not appropriate. If there's a use for either, we can easily add a flag which would just flip the sign on one exptab. For some unknown reason, possibly to allow reusing FFT's exp tables, av_rdft's C2R output is 0.5x lower than what it should be to ensure a proper back-and-forth conversion. This code outputs its real samples at the correct level, which matches FFTW's level, and allows the user to change the level and insert arbitrary multiplies for free by setting the scale option.
2022-01-21 07:50:53 +01:00
type == AV_TX_FLOAT_RDFT ? "rdft_float" :
lavu/tx: add missing prints for the type of dctI/dstI
2023-09-03 16:47:53 +02:00
type == AV_TX_FLOAT_DCT_I ? "dctI_float" :
type == AV_TX_FLOAT_DST_I ? "dstI_float" :
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
type == AV_TX_DOUBLE_FFT ? "fft_double" :
type == AV_TX_DOUBLE_MDCT ? "mdct_double" :
lavu/tx: add an RDFT implementation RDFTs are full of conventions that vary between implementations. What I've gone for here is what's most common between both fftw, avcodec's rdft and what we use, the equivalent of which is DFT_R2C for forward and IDFT_C2R for inverse. The other 2 conventions (IDFT_R2C and DFT_C2R) were not used at all in our code, and their names are also not appropriate. If there's a use for either, we can easily add a flag which would just flip the sign on one exptab. For some unknown reason, possibly to allow reusing FFT's exp tables, av_rdft's C2R output is 0.5x lower than what it should be to ensure a proper back-and-forth conversion. This code outputs its real samples at the correct level, which matches FFTW's level, and allows the user to change the level and insert arbitrary multiplies for free by setting the scale option.
2022-01-21 07:50:53 +01:00
type == AV_TX_DOUBLE_RDFT ? "rdft_double" :
lavu/tx: add missing prints for the type of dctI/dstI
2023-09-03 16:47:53 +02:00
type == AV_TX_DOUBLE_DCT_I ? "dctI_double" :
type == AV_TX_DOUBLE_DST_I ? "dstI_double" :
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
type == AV_TX_INT32_FFT ? "fft_int32" :
type == AV_TX_INT32_MDCT ? "mdct_int32" :
lavu/tx: add an RDFT implementation RDFTs are full of conventions that vary between implementations. What I've gone for here is what's most common between both fftw, avcodec's rdft and what we use, the equivalent of which is DFT_R2C for forward and IDFT_C2R for inverse. The other 2 conventions (IDFT_R2C and DFT_C2R) were not used at all in our code, and their names are also not appropriate. If there's a use for either, we can easily add a flag which would just flip the sign on one exptab. For some unknown reason, possibly to allow reusing FFT's exp tables, av_rdft's C2R output is 0.5x lower than what it should be to ensure a proper back-and-forth conversion. This code outputs its real samples at the correct level, which matches FFTW's level, and allows the user to change the level and insert arbitrary multiplies for free by setting the scale option.
2022-01-21 07:50:53 +01:00
type == AV_TX_INT32_RDFT ? "rdft_int32" :
lavu/tx: add missing prints for the type of dctI/dstI
2023-09-03 16:47:53 +02:00
type == AV_TX_INT32_DCT_I ? "dctI_int32" :
type == AV_TX_INT32_DST_I ? "dstI_int32" :
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
"unknown");
}
avutil/tx: print debug log at trace level The output of TX is extremely verbose and makes it harder to find other debug log messages, so print most of it at trace level. Signed-off-by: James Almer <jamrial@gmail.com>
2024-02-22 04:29:25 +01:00
static void print_cd_info(const FFTXCodelet *cd, int prio, int len, int print_prio,
int log_level)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
{
avcodec/libaribb24,ttmlenc, avutil/tx: Remove redundant init of AVBPrint An AVBPrint is initialized via av_bprint_init() (or av_bprint_init_for_buffer()) which expects uninitialized AVBPrints; it is therefore not necessary to zero them before the actual initialization. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
2023-09-11 16:08:05 +02:00
AVBPrint bp;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
av_bprint_init(&bp, 0, AV_BPRINT_SIZE_AUTOMATIC);
av_bprintf(&bp, "%s - type: ", cd->name);
print_type(&bp, cd->type);
av_bprintf(&bp, ", len: ");
lavu/tx: improve transform tree logging Now prints the actual codelet size used, as well as the number of allowed factors.
2022-10-01 12:35:14 +02:00
if (!len) {
if (cd->min_len != cd->max_len)
av_bprintf(&bp, "[%i, ", cd->min_len);
if (cd->max_len == TX_LEN_UNLIMITED)
av_bprintf(&bp, "∞");
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
else
lavu/tx: improve transform tree logging Now prints the actual codelet size used, as well as the number of allowed factors.
2022-10-01 12:35:14 +02:00
av_bprintf(&bp, "%i", cd->max_len);
} else {
av_bprintf(&bp, "%i", len);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
}
lavu/tx: improve transform tree logging Now prints the actual codelet size used, as well as the number of allowed factors.
2022-10-01 12:35:14 +02:00
if (cd->factors[1]) {
av_bprintf(&bp, "%s, factors", !len && cd->min_len != cd->max_len ? "]" : "");
if (!cd->nb_factors)
av_bprintf(&bp, ": [");
else
av_bprintf(&bp, "[%i]: [", cd->nb_factors);
for (int i = 0; i < TX_MAX_FACTORS; i++) {
if (i && cd->factors[i])
av_bprintf(&bp, ", ");
if (cd->factors[i] == TX_FACTOR_ANY)
av_bprintf(&bp, "any");
else if (cd->factors[i])
av_bprintf(&bp, "%i", cd->factors[i]);
else
break;
}
av_bprintf(&bp, "], ");
} else {
av_bprintf(&bp, "%s, factor: %i, ",
!len && cd->min_len != cd->max_len ? "]" : "", cd->factors[0]);
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
print_flags(&bp, cd->flags);
if (print_prio)
av_bprintf(&bp, ", prio: %i", prio);
avutil/tx: print debug log at trace level The output of TX is extremely verbose and makes it harder to find other debug log messages, so print most of it at trace level. Signed-off-by: James Almer <jamrial@gmail.com>
2024-02-22 04:29:25 +01:00
av_log(NULL, log_level, "%s\n", bp.str);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
}
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
static void print_tx_structure(AVTXContext *s, int depth)
{
const FFTXCodelet *cd = s->cd_self;
for (int i = 0; i <= depth; i++)
avutil/tx: use a lower log level for the debug messages The amount of lines printed is too high for the verbose level, and the debug level is a better fit for their content. Signed-off-by: James Almer <jamrial@gmail.com>
2022-11-07 18:15:49 +01:00
av_log(NULL, AV_LOG_DEBUG, " ");
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
avutil/tx: print debug log at trace level The output of TX is extremely verbose and makes it harder to find other debug log messages, so print most of it at trace level. Signed-off-by: James Almer <jamrial@gmail.com>
2024-02-22 04:29:25 +01:00
print_cd_info(cd, cd->prio, s->len, 0, AV_LOG_DEBUG);
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
for (int i = 0; i < s->nb_sub; i++)
print_tx_structure(&s->sub[i], depth + 1);
}
#endif /* CONFIG_SMALL */
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
typedef struct TXCodeletMatch {
const FFTXCodelet *cd;
int prio;
} TXCodeletMatch;
static int cmp_matches(TXCodeletMatch *a, TXCodeletMatch *b)
{
return FFDIFFSIGN(b->prio, a->prio);
}
/* We want all factors to completely cover the length */
static inline int check_cd_factors(const FFTXCodelet *cd, int len)
{
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
int matches = 0, any_flag = 0;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
for (int i = 0; i < TX_MAX_FACTORS; i++) {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int factor = cd->factors[i];
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
if (factor == TX_FACTOR_ANY) {
any_flag = 1;
matches++;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
continue;
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
} else if (len <= 1 || !factor) {
break;
} else if (factor == 2) { /* Fast path */
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int bits_2 = ff_ctz(len);
if (!bits_2)
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
continue; /* Factor not supported */
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
len >>= bits_2;
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
matches++;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
} else {
int res = len % factor;
if (res)
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
continue; /* Factor not supported */
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
while (!res) {
len /= factor;
res = len % factor;
}
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
matches++;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
}
}
lavu/tx: allow codelets to specify a minimum number of matching factors
2022-10-01 12:21:28 +02:00
return (cd->nb_factors <= matches) && (any_flag || len == 1);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
}
av_cold int ff_tx_init_subtx(AVTXContext *s, enum AVTXType type,
uint64_t flags, FFTXCodeletOptions *opts,
int len, int inv, const void *scale)
{
int ret = 0;
AVTXContext *sub = NULL;
TXCodeletMatch *cd_tmp, *cd_matches = NULL;
unsigned int cd_matches_size = 0;
lavu/tx: refactor and separate codelet list and prio code
2022-11-17 22:14:53 +01:00
int codelet_list_idx = codelet_list_num;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int nb_cd_matches = 0;
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#if !CONFIG_SMALL
avcodec/libaribb24,ttmlenc, avutil/tx: Remove redundant init of AVBPrint An AVBPrint is initialized via av_bprint_init() (or av_bprint_init_for_buffer()) which expects uninitialized AVBPrints; it is therefore not necessary to zero them before the actual initialization. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
2023-09-11 16:08:05 +02:00
AVBPrint bp;
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#endif
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
/* We still accept functions marked with SLOW, even if the CPU is
* marked with the same flag, but we give them lower priority. */
const int cpu_flags = av_get_cpu_flags();
lavu/tx: make slow ISA extension penalties smarter Instead of having a fixed -64 prio penalty, make the penalties more granular. As the prio is based on the register size in bits, decrementing it by 129 makes AVX SLOW functions be avoided in favor of any SSE versions.
2022-05-21 00:04:11 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
/* Flags the transform wants */
uint64_t req_flags = flags;
lavu/tx: do not mix declarations and code
2022-01-26 04:54:49 +01:00
/* Flags the codelet may require to be present */
lavu/tx: add real to real and real to imaginary RDFT transforms These are in-place transforms, required for DCT-I and DST-I. Templated as the mod2 variant requires minor modifications, and is required specifically for DCT-I/DST-I.
2023-08-03 18:21:23 +02:00
uint64_t inv_req_mask = AV_TX_FULL_IMDCT |
AV_TX_REAL_TO_REAL |
AV_TX_REAL_TO_IMAGINARY |
FF_TX_PRESHUFFLE |
FF_TX_ASM_CALL;
lavu/tx: do not mix declarations and code
2022-01-26 04:54:49 +01:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
/* Unaligned codelets are compatible with the aligned flag */
if (req_flags & FF_TX_ALIGNED)
req_flags |= AV_TX_UNALIGNED;
/* If either flag is set, both are okay, so don't check for an exact match */
if ((req_flags & AV_TX_INPLACE) && (req_flags & FF_TX_OUT_OF_PLACE))
req_flags &= ~(AV_TX_INPLACE | FF_TX_OUT_OF_PLACE);
if ((req_flags & FF_TX_ALIGNED) && (req_flags & AV_TX_UNALIGNED))
req_flags &= ~(FF_TX_ALIGNED | AV_TX_UNALIGNED);
/* Loop through all codelets in all codelet lists to find matches
* to the requirements */
lavu/tx: refactor and separate codelet list and prio code
2022-11-17 22:14:53 +01:00
while (codelet_list_idx--) {
const FFTXCodelet * const * list = codelet_list[codelet_list_idx];
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
const FFTXCodelet *cd = NULL;
while ((cd = *list++)) {
/* Check if the type matches */
if (cd->type != TX_TYPE_ANY && type != cd->type)
continue;
/* Check direction for non-orthogonal codelets */
if (((cd->flags & FF_TX_FORWARD_ONLY) && inv) ||
lavu/tx: add real to real and real to imaginary RDFT transforms These are in-place transforms, required for DCT-I and DST-I. Templated as the mod2 variant requires minor modifications, and is required specifically for DCT-I/DST-I.
2023-08-03 18:21:23 +02:00
((cd->flags & (FF_TX_INVERSE_ONLY | AV_TX_FULL_IMDCT)) && !inv) ||
((cd->flags & (FF_TX_FORWARD_ONLY | AV_TX_REAL_TO_REAL)) && inv) ||
((cd->flags & (FF_TX_FORWARD_ONLY | AV_TX_REAL_TO_IMAGINARY)) && inv))
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
continue;
/* Check if the requested flags match from both sides */
if (((req_flags & cd->flags) != (req_flags)) ||
((inv_req_mask & cd->flags) != (req_flags & inv_req_mask)))
continue;
/* Check if length is supported */
if ((len < cd->min_len) || (cd->max_len != -1 && (len > cd->max_len)))
continue;
/* Check if the CPU supports the required ISA */
lavu/tx: clean up CPU flags check Just makes it more readable.
2022-01-27 01:52:02 +01:00
if (cd->cpu_flags != FF_TX_CPU_FLAGS_ALL &&
lavu/tx: refactor and separate codelet list and prio code
2022-11-17 22:14:53 +01:00
!(cpu_flags & (cd->cpu_flags & ~cpu_slow_mask)))
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
continue;
/* Check for factors */
if (!check_cd_factors(cd, len))
continue;
/* Realloc array and append */
cd_tmp = av_fast_realloc(cd_matches, &cd_matches_size,
sizeof(*cd_tmp) * (nb_cd_matches + 1));
if (!cd_tmp) {
av_free(cd_matches);
return AVERROR(ENOMEM);
}
cd_matches = cd_tmp;
cd_matches[nb_cd_matches].cd = cd;
lavu/tx: refactor and separate codelet list and prio code
2022-11-17 22:14:53 +01:00
cd_matches[nb_cd_matches].prio = get_codelet_prio(cd, cpu_flags, len);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
nb_cd_matches++;
}
}
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#if !CONFIG_SMALL
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
/* Print debugging info */
av_bprint_init(&bp, 0, AV_BPRINT_SIZE_AUTOMATIC);
av_bprintf(&bp, "For transform of length %i, %s, ", len,
inv ? "inverse" : "forward");
print_type(&bp, type);
av_bprintf(&bp, ", ");
print_flags(&bp, flags);
lavu/tx: print debug info even if no transforms are found
2022-01-28 08:08:58 +01:00
av_bprintf(&bp, ", found %i matches%s", nb_cd_matches,
nb_cd_matches ? ":" : ".");
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#endif
lavu/tx: print debug info even if no transforms are found
2022-01-28 08:08:58 +01:00
/* No matches found */
if (!nb_cd_matches)
return AVERROR(ENOSYS);
/* Sort the list */
AV_QSORT(cd_matches, nb_cd_matches, TXCodeletMatch, cmp_matches);
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#if !CONFIG_SMALL
avutil/tx: print debug log at trace level The output of TX is extremely verbose and makes it harder to find other debug log messages, so print most of it at trace level. Signed-off-by: James Almer <jamrial@gmail.com>
2024-02-22 04:29:25 +01:00
av_log(NULL, AV_LOG_TRACE, "%s\n", bp.str);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
for (int i = 0; i < nb_cd_matches; i++) {
avutil/tx: print debug log at trace level The output of TX is extremely verbose and makes it harder to find other debug log messages, so print most of it at trace level. Signed-off-by: James Almer <jamrial@gmail.com>
2024-02-22 04:29:25 +01:00
av_log(NULL, AV_LOG_TRACE, " %i: ", i + 1);
print_cd_info(cd_matches[i].cd, cd_matches[i].prio, 0, 1, AV_LOG_TRACE);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
}
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#endif
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
avutil/tx: add null pointer check after av_mallocz Fix CID: 1497863 there will get null pointer in attempt to initialize each if alloc memory failed. Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
2022-01-28 03:08:18 +01:00
if (!s->sub) {
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
s->sub = sub = av_mallocz(TX_MAX_SUB*sizeof(*sub));
avutil/tx: add null pointer check after av_mallocz Fix CID: 1497863 there will get null pointer in attempt to initialize each if alloc memory failed. Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
2022-01-28 03:08:18 +01:00
if (!sub) {
ret = AVERROR(ENOMEM);
goto end;
}
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
/* Attempt to initialize each */
for (int i = 0; i < nb_cd_matches; i++) {
const FFTXCodelet *cd = cd_matches[i].cd;
AVTXContext *sctx = &s->sub[s->nb_sub];
sctx->len = len;
sctx->inv = inv;
sctx->type = type;
lavu/tx: propagate the codelet flags into the context The field is documented as a combination of both.
2022-09-10 02:26:02 +02:00
sctx->flags = cd->flags | flags;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
sctx->cd_self = cd;
s->fn[s->nb_sub] = cd->function;
s->cd[s->nb_sub] = cd;
ret = 0;
if (cd->init)
ret = cd->init(sctx, cd, flags, opts, len, inv, scale);
if (ret >= 0) {
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
if (opts && opts->map_dir != FF_TX_MAP_NONE &&
sctx->map_dir == FF_TX_MAP_NONE) {
/* If a specific map direction was requested, and it doesn't
* exist, create one.*/
sctx->map = av_malloc(len*sizeof(*sctx->map));
if (!sctx->map) {
ret = AVERROR(ENOMEM);
goto end;
}
for (int i = 0; i < len; i++)
sctx->map[i] = i;
} else if (opts && (opts->map_dir != sctx->map_dir)) {
int *tmp = av_malloc(len*sizeof(*sctx->map));
if (!tmp) {
ret = AVERROR(ENOMEM);
goto end;
}
memcpy(tmp, sctx->map, len*sizeof(*sctx->map));
for (int i = 0; i < len; i++)
sctx->map[tmp[i]] = i;
avutil/tx: Use proper deallocator May fix the FATE failures on x64 Windows here: https://fate.ffmpeg.org/report.cgi?slot=x86_64-msvc17-windows-native&time=20221125130443 Reviewed-by: Lynne <dev@lynne.ee> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
2022-11-25 15:26:38 +01:00
av_free(tmp);
lavu/tx: refactor to explicitly track and convert lookup table order Necessary for generalizing PFAs.
2022-11-19 00:47:45 +01:00
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
s->nb_sub++;
goto end;
}
s->fn[s->nb_sub] = NULL;
s->cd[s->nb_sub] = NULL;
lavu/tx: add ff_tx_clear_ctx() This function allows implementations to clean up a context after successfully initializing subcontexts.
2022-10-01 12:20:10 +02:00
reset_ctx(sctx, 0);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (ret == AVERROR(ENOMEM))
break;
}
lavu/tx: do not unconditionally free subcontexts if initialization fails If a codelet initializes 2 subtransforms, and the second one fails, the failure would free all subcontexts. Instead, if there are subcontexts still left, don't free the array. If all initializations fail, the init() function will return, and reset_ctx() from the previous step will clean up all contained subtransforms.
2022-01-29 01:02:37 +01:00
if (!s->nb_sub)
av_freep(&s->sub);
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
end:
av_free(cd_matches);
return ret;
}
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
av_cold int av_tx_init(AVTXContext **ctx, av_tx_fn *tx, enum AVTXType type,
int inv, int len, const void *scale, uint64_t flags)
{
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
int ret;
AVTXContext tmp = { 0 };
const double default_scale_d = 1.0;
const float default_scale_f = 1.0f;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (!len || type >= AV_TX_NB || !ctx || !tx)
return AVERROR(EINVAL);
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
if (!(flags & AV_TX_UNALIGNED))
flags |= FF_TX_ALIGNED;
if (!(flags & AV_TX_INPLACE))
flags |= FF_TX_OUT_OF_PLACE;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: correctly use a default scale parameter for all transform types This fixes the previous commit and adds more cases (DCT-I and DST-I). I am holding off on defining a scale parameter for FFTs as I'd like to use a complex value for them.
2024-02-17 20:50:48 +01:00
if (!scale && ((type == AV_TX_DOUBLE_MDCT) || (type == AV_TX_DOUBLE_DCT) ||
(type == AV_TX_DOUBLE_DCT_I) || (type == AV_TX_DOUBLE_DST_I) ||
(type == AV_TX_DOUBLE_RDFT)))
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
scale = &default_scale_d;
lavu/tx: correctly use a default scale parameter for all transform types This fixes the previous commit and adds more cases (DCT-I and DST-I). I am holding off on defining a scale parameter for FFTs as I'd like to use a complex value for them.
2024-02-17 20:50:48 +01:00
else if (!scale && !TYPE_IS(FFT, type))
scale = &default_scale_f;
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
ret = ff_tx_init_subtx(&tmp, type, flags, NULL, len, inv, scale);
if (ret < 0)
return ret;
*ctx = &tmp.sub[0];
*tx = tmp.fn[0];
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#if !CONFIG_SMALL
avutil/tx: use a lower log level for the debug messages The amount of lines printed is too high for the verbose level, and the debug level is a better fit for their content. Signed-off-by: James Almer <jamrial@gmail.com>
2022-11-07 18:15:49 +01:00
av_log(NULL, AV_LOG_DEBUG, "Transform tree:\n");
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
print_tx_structure(*ctx, 0);
lavu/tx: disable debugging information when CONFIG_SMALL
2022-02-07 03:42:19 +01:00
#endif
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 07:14:46 +01:00
return ret;
libavutil: add an FFT & MDCT implementation This commit adds a new API to libavutil to allow for arbitrary transformations on various types of data. This is a partly new implementation, with the power of two transforms taken from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while the 3-point FFT was written from scratch. The (i)mdct folding code is taken from mdct15 as well, as the mdct_template code was somewhat old, messy and not easy to separate. A notable feature of this implementation is that it allows for 3xM and 5xM based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc. AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will allow for decoding of such streams. A non-exaustive list of supported sizes: 4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240, 256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560... The API was designed such that it allows for not only 1D transforms but also 2D transforms of certain block sizes. This was partly on accident as the stride argument is required for Opus MDCTs, but can be used in the context of a 2D transform as well. Also, various data types would be implemented eventually as well, such as "double" and "int32_t". Some performance comparisons with libfftw3f (SIMD disabled for both): 120: 22353 decicycles in fftwf_execute, 1024 runs, 0 skips 21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips 128: 22003 decicycles in fftwf_execute, 1024 runs, 0 skips 23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips 384: 75939 decicycles in fftwf_execute, 1024 runs, 0 skips 73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips 640: 104354 decicycles in fftwf_execute, 1024 runs, 0 skips 149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips 768: 109323 decicycles in fftwf_execute, 1024 runs, 0 skips 164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips 960: 186210 decicycles in fftwf_execute, 1024 runs, 0 skips 215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips 1024: 163464 decicycles in fftwf_execute, 1024 runs, 0 skips 199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD is around 2x faster than theirs, even if our ptwo SIMD is slightly slower. The goal is to remove the libavcodec/mdct15 code and deprecate the libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported. New code throughout the project should use this API. The implementation passes fate when used in Opus, AAC and Vorbis, and the output is identical with ATRAC9 as well.
2019-05-02 16:07:12 +02:00
}